TCT Main Blade & Scorer to suit “Holzma HPP11” Machine – 420 x 72z & 180 x 36z Complete Set

Tungsten carbide tipped saw blade & conical scorer for used on power fed beam saws. Blades are specially designed for cutting chipboard based materials & MDF. Used in combination with conical scoring blades to achieve excellent cutting performance. Extremely long lifetime of carbide tips.

Tungsten carbide tipped saw blade & conical scorer for used on power fed beam saws. Blades are specially designed for cutting chipboard based materials & MDF. Used in combination with conical scoring blades to achieve excellent cutting performance. Extremely long lifetime of carbide tips.

This set includes 1 x Main blade & 1 x Conical scorer. Dimensions below:

Main Blade:

Saw Blade Diameter: 420mm

Amount of teeth: 72

Tooth Geometry: Triple Chip Grind, Positive Hook Angle

Saw Kerf/Plate: 4.4/3.2 (mm)

Scoring Blade:

Saw Blade Diameter: 180mm

Amount of teeth: 36

Tooth Geometry: Flat Top Grind, Positive Hook Angle

Saw Kerf/Plate: 4.7 – 5.8/3.5 (mm)

*Please note that blades come as a standard 30mm bore (WITH EUROSLOTS) unless otherwise stated. Blades are manufactured to suit specific machines. Blade bores can be machined open or reduced using reduction rings. For use of blades with reduction rings, please check machine specification and flange size to ensure your blade can take a reduction ring.

Blades can be re-sharpened and re-tipped on site. If you do require your blade to be sharpened please contact our office and we can arrange for it to be done.

PLEASE NOTE THAT FOR ALL POWER FED BEAM SAW BLADES & CONICAL SCORERS, AS A RULE THEY SHOULD BE SHARPENED TOGETHER AS A SET. IF YOU DO REQUIRE OUR SHARPENING SERVICE, IT IS ADVISED THAT TO KEEP CUTTING PERFORMANCE TO AN OPTIMUM LEVEL THAT YOU SUPPLY US WITH THE BLADE AND THE SCORER. THEY SHOULD BE KEPT IN SETS DURING THE ENTIRE BLADE LIFE.

Dolphin Tooling Ltd

6a Main Street

Ferryhill

County Durham

DL17 8LA

Tel: 01740 655855 Fax: 01740 657827

dolphintoolingsales@gmail.com