TCT Circular Saw Blade – 180 x 28z – For Cutting Across Grain (Natural Wood)

Blades used for cutting across the grain of natural wood. Alternate bevel tooth geometry allow the blade to sever the fibres marginally ahead of other cutting edges, thus giving a nice clean finish.

Tungsten carbide tipped saw blade used in the process of wood-cutting. Saw blades used for cutting across the grain of natural massive wood.

Saw Blade Diameter: 180mm

Saw Blade Bore: 20mm (Standard*)

Amount of teeth: 28

Tooth Geometry: 10° alternate top bevel, 10° face cutting angle, 15° top clearance angle

Saw Kerf/Plate: 3.2/2.2 (mm)

*Please note that blades come as a standard 20mm bore (WITH EUROSLOTS) unless otherwise stated. Blade bores can be machined open or reduced using reduction rings. For use of blades with reduction rings, please check machine specification and flange size to ensure your blade can take a reduction ring.

Blades can be re-sharpened and re-tipped on site. If you do require your blade to be sharpened please contact our office and we can arrange for it to be done.

Dolphin Tooling Ltd

6a Main Street

Ferryhill

County Durham

DL17 8LA

Tel: 01740 655855 Fax: 01740 657827

dolphintoolingsales@gmail.com